© 2010 ControlOMatic, Inc. Grass Valley, California, USA
TechniChlor Hot Tub and Spa Chlorine Generator
TechniChlor uses the same "no buttons", "no moving parts", LED indicator technology as its counterpart ColorChlor, but is conveniently built for spas that already feature programmable light show entertainment. TechniChlor is a spa chlorine generator specifically designed for consumers that are just looking for pure chlorination. TechniChlor is designed with 10 levels of chlorine production, salt level indicator lights and will automatically adjust for changes in temperature and spa usage. The TechniChlor is a simple spa chlorine generator that just makes chlorine and has self cleaning and adjustable power levels.
- No Light Shows - Just Around The Clock Chlorine Production
- Pure Chlorination
- 10 Levels of Chlorine Production
- Salt Level Indicator Lights
- Self Cleaning Reverse Polarity Technology
- Plug & Play! No Spa Modifications Required
- No Buttons, No Control Boxes, No Timers!
- Adjusts For Variations In Spa Temp & Usage
- Titanium plates coated with Ruthenium Oxide for 7500 hours of chlorine production
Save time and money with TechniChlor, while it takes care of your sanitation needs! TechniChlor is designed for spas up to 600 gallons and can produce up to 20 grams of chlorine per day.
It can be a challenge to to keep the water in your spa or hot tub crystal clear and smelling nice. If you forget to add chlorine or bromine for a single day or the chlorine feeder runs out and you don’t refill it that could lead to spa problems. Due to the higher temperature of the water the chemical balance is critical to be continuously maintained to keep it safe. Proper spa maintenance leads to your spa being safe when you want to use it. Even if the water looks good you should measure the chemical balance before use. Spa chlorine generators can greatly reduce spa problems and spa maintenance as they continuously make chlorine (or bromine) every day so you don’t have to. The TechniChlor makes chlorine on a 6 hour cycle. Every 6 hours it starts making chlorine, and based on the power level it will turn off at some point in that 6 hours and remain in standby mode, then at the next 6 hours it will start again. At power level 5 it will be on for 1.5 hours out of every 6. If you use the spa and let the TechniChlor know by tapping it, then the TechniChlor will be put into boost mode and be on for 3 times the normal on time or 4.5 hours out of every 6 for a full day. The boost mode helps to add the chlorine back from the spa being used. Many swimming pools now have electronic chlorine generators as they help to prevent problems and require less maintenance while making the water soft and more pleasant for the swimmers. Some of our customer feedback relates to how easy spa maintenance has become with the addition of the TechniChlor.
Easy Installation & Ordering Options
The TechniChlor is available in two installation options, depending on the configuration of the power source near your spa or hot tub
SI - Standard Installation
The standard Installation option fits most power source configurations. The Standard Installation Option is designed for basic 110 VAC outlets that are within five feet of the pool or spa and has a 10' Cord. The 110 VAC outlet must be GFI or GFCI protected. The 110 VAC GFI or GFCI protected outlet must have a weather protective cover to protect the transformer at the power source.
TechniChlor: Standard Installation
Requirements:
- Spas & Hot Tubs To 600 Gallons
- 110 VAC Outlet That Is GFI or GFCI Protected
- Weather Protection Required At Power Source
Included In Purchase:
- 10' Power Cord & Standard Size Transformer
- Salt & Chlorine Test Strips
- 1-Year Limited Warranty
- Owners Manual
OI - Outside Installation
The Outside Installation (OI) option is built for power source configurations where there is a GFI or GFCI outlet near the pool or spa with a 110 or 220 VAC power source, but lacks a weather protective box large enough to house the auto sensing 110 / 220 VAC transformer. This option includes a NEMA Rated 6P weather protective box specifically designed to house the 110 / 220 VAC auto sensing transformer. The NEMA box contains a five foot extension cord to connect to the existing 110 or 220 VAC power source near the pool or spa. The 110 or 220 VAC power source near your pool or spa must be GFI or GFCI protected and must have a weather protective cover to protect the extension cord connection at the power source. A weather protective cover can easily be purchased at any local hardware store. Please see diagram and ordering options below.
TechniChlor: Outside Installation
Requirements:
- Spas & Hot Tubs To 600 Gallons
- 110 or 220 VAC Outlet That Is GFI or GFCI Protected
- Weather Protection Required At Power Source
Included In Purchase:
- NEMA 6P Box & Auto Sensing Transformer
- 10' Power Cord & 5' Extension Cord
- Salt & Chlorine Test Strips
- 1-Year Limited Warranty
- Owners Manual
Cable Extension
For Outside installation Only
Length: 10 Feet
European Power Supply
200-240VAC to 5V-@3A European power supply with CE rating. Not available on the outside installation (OI) models. When purchasing the ColorChlor or TechniChlor, please indicate in the comments if you want the EURO power supply, the price is the same.
TechniChlor Combo 1
Includes the Following:
- TechniChlor SI Chlorine Generator
- CV-700 Phosphate Remover (Quart)
- 6 Pounds Dead Sea Salt
Save 5% on the combo
UPC: 689466296525
TechniChlor Combo 2
Includes the Following:
- TechniChlor SI Chlorine Generator
- SeaKlear Spa Phosphate Remover (Pint)
- 6 Pounds Himalayan Salt
- AquaChek Salt Test Kit (10 strips)
- Leisure Time Renew, 2.2 pounds
Save 7% on the combo
UPC: 689466296532
